Installation Tips

Lighting Installation Tips

Table Lamps Installation

Unpacking: Carefully unpack the table lamp from its packaging. Ensure that all components, including the lamp base, shade, bulb, and any hardware, are present. Check for any visible damages during this process.
Base Assembly: If the lamp base requires assembly, follow the provided instructions. Usually, this involves screwing together different parts of the base. Make sure all connections are tight to ensure stability.
Bulb Installation: Select the appropriate bulb as recommended by the lamp's specifications. Twist the bulb gently into the socket until it is securely in place. Do not over - tighten the bulb to avoid damage.
Shade Attachment: Place the lampshade on top of the lamp base according to the attachment method. Some shades may use clips, while others may have a threaded connection. Adjust the position of the shade to ensure it is centered and evenly covers the bulb.
Power Connection: Plug the lamp into a suitable electrical outlet. Before turning on the lamp, double - check all connections to ensure safety.
Pendant Installation
Safety First: Before starting the installation, turn off the power to the electrical circuit where the pendant will be installed. Use a voltage tester to confirm that the power is off.
Ceiling Mount Preparation: Locate the ceiling joist where you plan to install the pendant. Mark the position and use a drill to create holes for the mounting bracket. Insert wall anchors if necessary, especially in drywall ceilings.
Mounting Bracket Installation: Secure the mounting bracket to the ceiling using screws. Make sure the bracket is level and firmly attached.
Wiring Connection: Connect the wires of the pendant to the electrical wires in the ceiling. Match the colors of the wires (usually black to black, white to white, and green or bare copper to the ground wire). Use wire nuts to twist the wires together securely.
Pendant Hanging: Hang the pendant from the mounting bracket. Adjust the height of the pendant according to your preference using the provided chain or cord. Make sure the pendant is hanging straight.
Final Checks: Once the pendant is installed, turn the power back on. Test the lamp to ensure it is working properly. Check for any loose connections or abnormal lighting.
Remember, if you are unsure about any part of the installation process, it is advisable to consult a professional electrician to ensure a safe and proper installation.